Kohler Command PRO electronic ignition system generates a stronger spark at low cranking speed and Automatic Compression Release (ACR) allows compression to escape during cranking to reduce pull force.
The industry's only closed-loop Electronic Fuel Injection (EFI) system is an available option on Command PRO 26 hp engines. The system provides increased fuel economy for longer run times and reduced engine emissions for less of an impact on the environment.
Engine Type:
4-cycle, gasoline, OHV, EFI, cast iron cylinder liners, aluminum block
| Max Power @3600 RPM hp (kW) | 26 (19.4) |
| Displacement cu in (cc) | 44.0 (725) |
| Bore in (mm) | 3.3 (83) |
| Stroke in (mm) | 2.6 (67) |
| Peak Torque @ Maximum lbs ft (Nm) | 40 (54.2) |
| Compression Ratio | 9.0:1 |
| Dry Weight lbs (kg) | 94 (43) |
| Oil Capacity U.S. quarts (L) | 2 (1.9) |
| Lubrication | Full pressure w/full-flow filter |
| Dimensions L x W x H in | 14 x 17.7 x 19.0 |
* Length is grass screen to PTO mounting face. Width is spark plug to spark plug. Height is top of air cleaner to mounting feet.
Kilowatt (kW) and horsepower (HP) specifications for Kohler general purpose engines are calculated pursuant to the Society of Automotive Engineers (SAE) J1940 for horsepower ratings - calculated with the air cleaner and muffler removed, per the SAE standard. Actual engine horsepower is lower and affected by, but not limited to, accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed and ambient operating conditions (temperature, humidity and altitude). The reason for this standard is to provide consistent measurement to customers who may want to control the intake and exhaust features of the engine. It is important to note that the power output of all Kohler engines is always as advertised. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications,designs and standard equipment without notice and without incurring obligation.
